Fascia and Soffit Replacement

Fascia and soffit replacement is the part of an exterior job nobody photographs and everybody needs. Fascia is the board your gutters hang from. Soffit is the underside of the overhang, and it carries the intake ventilation your attic depends on. So when either fails, the problems show up somewhere else entirely.

Signs You Need Fascia and Soffit Replacement

Soft, spongy or visibly rotted board behind the gutter
Peeling paint or staining along the fascia line
Sagging gutters, because the board holding them has given way
Daylight, wasp nests or squirrel entry at the overhang
Dented or torn aluminum wrap after hail
Blocked or painted-over soffit vents

Why Soffit Ventilation Matters So Much Here

Ice dams are a heat problem, not a roof problem. Warm air escapes into the attic, melts snow on the upper roof, and the meltwater refreezes at the cold eave. Balanced ventilation keeps the attic cold enough to stop that cycle, and intake comes through the soffit. Consequently, blocked soffit vents cause ice dams no amount of roofing will fix.

What a Proper Job Involves

First, we remove the wrap and the gutter to see the actual board. Second, we replace rotted material rather than wrapping over it, which is the shortcut that hides problems for a few years. Third, we confirm the soffit vents are open and correctly sized against the attic square footage. Finally, we wrap in aluminum with a hemmed edge so it does not oil-can or rattle in wind.

Wraps and Panels in a Storm Claim

Aluminum wraps dent in hail as readily as gutters do, and wind tears soffit panels out of their channels. Because both happened in the same event as the roof damage, both belong in the claim. We scope them during every storm damage restoration inspection.